INR18650-2600mAh Li-ion Rechargeable cylindrical battery,2600mAh Li-ion battery,18650 battery ,Long life lithium ion battery
2600mah Li-Ion Battery Product Details:
NO.
|
Items
|
Specifications
|
1
|
Model
|
INR18650-2600
|
2
|
Can Material
|
Ni-Iron
|
3
|
Rated Capacity
|
2600 mAh(0.2C5A)
|
Min. Capacity
|
2550 mAh(0.2C5A)
|
4
|
Nominal Voltage
|
3.7V
|
5
|
Max. Charge Voltage
|
4.2 V
|
6
|
Discharge Cut-off Voltage
|
2.75V
|
7
|
Max. Charge Current
|
1 C5A
|
8
|
Standard Discharging Current
|
0.2 C5A
|
9
|
Max. Continuous Discharge Current
|
13 A
|
10
|
Max. Pulse Discharge Current
|
30A( 2s pulse )
|
11
|
Max. Diameter(include PET)
|
≤18.40 mm
|
12
|
Max. Height (include PET)
|
≤65.50mm
|
13
|
Weight (Approx.)
|
44.0±1.0g
|
14
|
Impedance (Max. at 1000Hz、charged status)
|
≤ 18 mΩ
|
15
|
Charge Method (CC/CV)
|
Standard
|
0.5 C5A×6hrs
|
Quick
|
1 C5A×1.5hrs.
|
16
|
Operating Temperature
|
Charge
|
0℃~45℃ 32oF~113oF
|
Discharge
|
-20℃~60℃ -4oF~140oF
|
Storage
|
-20℃~45℃ -4oF~113oF
|
Characteristic of custom 2600mAh Li-ion battery
Without special instructions, the following tests should be done under the condition of : temperature(23℃±3℃), atmospheric pressure (86KPa~106KPa), relative humidity (45%~85%), and the tests should be done within two weeks after receiving the products.
the definitions of some nomenclatures of this specification
standard Charge: Charge with current 0.2C5A to limit charge voltage under the condition of23℃±3℃ surrounding temperature, then change to charge with constant voltage till the current less than or equal to 0.02C5A.
Electrical Characteristic for power tool rechargeable Li-ion battery supplier
NO.
|
Item
|
Standard
|
Test Method
|
1
|
Discharge rate capabilities
|
A)1 C5A ≥100% B)10 C5A ≥95% C)15 C5A ≥90%
|
Standard charged under the condition of normal atmospheric pressure and the environmental temperature of 23℃±3℃ and45%~85%RH, then rest for 30mins and discharge at1C5A、5 C5A、10 C5A to the discharge cut-off voltage respectively. Charge/discharge cycle can be conducted for 3times before meeting the Standards(the same below)
|
2
|
capacity retention and recovery
|
Residualcapacity≥94% Recoverablecapacity≥*98%
|
Standard charged under the condition of normal atmospheric pressure and the environmental temperature of 23℃±3℃, Stored for 28 days, then discharge at 0.2 C5A to 2.75Vmeasuring residual capacity; Then standard charge/discharge measure recoverable capacity.
|
3
|
Low Temperature Performance
|
discharge capacity≥85% rated capacityno distortion and no rupture
|
The cell shall be charged in accordance with the standard charge. Then stored in the temperature of -10℃±1℃ for4h, Discharge at the constant current of 0.2C5A down to the end-of-discharge voltage 2.75V.
|
4
|
Cycle Life
|
≥300cycles
|
Charge: The cell shall be charged in accordance with RapidCharge condition. rest for 10mins.Discharge: 10C5A discharge to 2.75V, one cycle is finished, then rest for 30mins. Then repeat above steps, when capacity is less than 80% of initial capacity, the battery life is over.
|
The company founded in 2014, focus on producing cylindrical power lithium-ion batteries. The company supply Electric vehicle cylindrical lithium battery, which include 1500mAh, 1300mAh, 2000mAh, 2200mAh, 2500mAh, 2600mAh Li-ion battery and 3000mAh Li-ion battery. All adopt the most advanced extrusion coating production technology and yearly production reaches to 250 million Ah power type 18650 High security lithium ion battery. Our products have high quality and competitive prices.
If you want to learn more about the High security lithium ion battery, please visit here.
https://www.sp-powerbattery.com/
More information:
http://www.newmadinaapparels.com
http://www.newvehicleaccessories.com
http://www.rubber-forum.com
http://www.architectsofx.com
http://www.electricblogger.info
http://www.mineralov.net
http://www.realestateblognet.com
http://www.electronicsmart.in
http://www.integratedcaremanager.com
http://www.businesslistinc.com
http://www.growyourbusinesslist.com
http://www.contralinks.com